پیاده سازی 6 سیگما در فرایند تولید
Implementation of Six Sigma in a Manufacturing Process
This paper presents a Six Sigma project conducted at a semiconductor company dedicated to the manufacture of circuit cartridges for inkjet printers. They are tested electrically in the final stage of the process measuring electrical characteristics to accept or reject them. Electrical failures accounted for about 50% of all defects. Therefore, it is crucial to establish the main problems, causes and actions to reduce the level of defects. With the implementation of Six Sigma, it was possible to determine the key factors, identify the optimum levels or tolerances and improvement opportunities. The major factors that were found through a design of experiments 3 factors and 2 levels were: abrasive pressure (90-95 psi), height of the tool (0.06-0.05) and cycle time (7000-8000 msec.). The improvement was a reduction in the electrical failures of around 50%. The results showed that with proper application of this methodology, and support for the team and staff of the organization, a positive impact on the quality and other features critical to customer satisfaction can be achieved
این مقاله یک طرح شش سیگما را در یک شرکت نیمه هادی که به تولید کارتریج مدار برای پرینترهای جوهر افشان اختصاص داده شده است ارائه می دهد. در مرحله نهایی فرآیند اندازه گیری ویژگی های الکتریکی به منظور تأیید یا رد کردن آنها از نظر الکتریکی آزمایش می شوند. خرابی های الکتریکی حدود 50 درصد از نقص ها را تشکیل می دهد. بنابراین، برای تعیین مشکلات اصلی، علل و اقدامات برای کاهش سطح نقص، ضروری است. با پیاده سازی شش سیگما، امکان تعیین عوامل کلیدی، تعیین سطوح بهینه یا تحمل و فرصت های بهبود یافته وجود داشت. عوامل اصلی که از طریق طراحی آزمایش ها یافت شدند، سه عامل و دو سطح شامل: فشار سایشی (90-95 psi)، ارتفاع ابزار (0.06-0.05) و زمان چرخه (7000 تا 8000 میلی ثانیه) بود. بهبود این امر باعث کاهش شکست الکتریکی حدود 50 درصد شد. نتایج نشان داد که با استفاده مناسب از این روش و حمایت از تیم و کارکنان سازمان، تاثیر مثبتی بر کیفیت و دیگر ویژگی های حیاتی رضایت مشتری به دست می آید.
Leave A Comment